Swan 54 10 ‘Coco’ 10

Nautor's Swan 54

The Overview

COMMENTS

The Swan 54 is a true cruising yacht intended to sail in comfort anywhere in the world. This classic design from Germán Frers brings together the best details of a cruising yacht.

 

Coco is a superb example delivered in 2018, and her current owners sailed from the Swan factory in Finland to New Zealand, an amazing adventure! The yacht is very well specified including carbon mast and boom, generator, air conditioning, full safety gear for ocean sailing, B&G navigation electronics and all necessary communication equipment.

 

She has been fully imported into New Zealand and tax paid, offering a very unique experience for AUS and NZ buyers. A must inspect if looking to start an ocean adventure in one of the best boats available on the market today.

 

 

HULL

The hull topsides are foam cored glass fiber reinforced vinylester construction. Hull bottom is mono- lithic/high density foam for increased impact resistance.

There is space in the lazarette to store a 2.8m inflatable dinghy

 

 

STEERING AND RUDDER

Composite spade rudder with stainless steel stock. Twin wheel steering

 

 

DECK

Coco has a teak deck with white sikaflex caulking, giving her a modern feel. The deck layout is such that all sheets, halyards etc all lead back to the safe, deep cockpit with electric winches, and the layout is clean and minimalistic incliuding all flush hatches. The large cockpit with great seating (cockpit cushion included), large teak cockpit table, storage and excellent protection via sprayhood (dodger) and bimini. Aft of the twin wheels and seating/ cockpit table is a spacious aft deck that leads to the hydraulically operated opening transom. This is a perfect solution whilst at anchor or on the dock.

 

Winches and Deck hardware

The deck hardware package is mostly from Antal and winches are Harken. All stainless-steel rails, stan- chions, padeyes and mooring cleats. Winches are:

  • 2 x Harken 2 Electric Self Tailing mainsheet winches
  • 2 x Harken 2 Electric Self Tailing primary winches

 

 

INTERIOR

The interior of Coco is finished in varnished European Oak timber to the usual high Nautor’s Swan standard.

 

Coupled with painted, fabric and leather finishes and descrete lighting, the interior is incredibly warm and comfortable. The Swan 54 has two bathrooms, the forward has fully enclosed shower stall and electric FW flush toilets. The owners cabin and one double guest cabin are forwad of the main saloon, and there are two aft cabins. One is a double and one a bunk room with extra storage and washing machine/drier. A safe is fitted in owner’s cabin.

 

Interior Arrangement

 

 

 

Galley

 

Adjoining the main saloon, the large galley is aft and to starboard, perfectly laid out for use at sea or rest. The benchtops are Corianand there is plenty of good storage, large sink, gas cooktop and oven, microwave oven and suitable refrigeration and freezer capacity (additional 85L freezer fitted under counter). Coco has a washing machine made by Miele WT2796

 

Saloon

 

The main saloon is light-filled thanks to large deck sky-lights that open and hull windows either side of the comfortable sofas. There is a dinnette to port with seating for up to 8 and a proper navigation station facing forward to starboard.

 

 

ENGINE AND THRUSTERS

The engine is a 110hp Yanmar 4JH110 CR with ZF25A gear box with 1,250 Hours The propeller Is a 3- blade folding propeller

The bow thruster is Side Power SR170-250T DC powered thruster

 

 

PLUMBING & VENTILATION

Fresh Water System

Sea Recovery Ultra Whisper 600 24v Watermaker. Capacity of 95l/h

 

 

 

 

ELECTRICAL

Electical system on Swan 54 is 24v and serviced by house battery bank of 525AH. There is also stand-alone engine start and generator start batteries. Charging is via a 110amp alternator on main engine, generator or Mastevolt Mass 24V 80amp shore power charger. All breakers and monitoring are located in the starboard aft cabin in a dedicated electrical locker and all is designed and installed to highest Nautor Swan quality with exceptinal attention to detail. The 220V system throughout the boat is serviced by a generator, shorepower and 24V/2500va inverter for low wattage equipment use whilst at sea. A 110V inverter has also been fitted. There are 220v and USB outlets throughout the boat.

AC System

Marine Air VARC 48 system with 41,000 BTU capacity/ 12kW with reverse cycle heating for all cabin spaces. Additional Hella turbo ventilation fans are fitted throughout Coco

Generator

Fischer Panda 10000 PMS 9.4KVA diesel generator (1,080 hrs)

Separate generator room, insulated and fire protected with firefighting system and ventilation

 

 

 

ELECTRONIC SYSTEM

Sailing Instruments and Navigation Systems

Coco is fitted with a Nautor’s Swan standard B&G Triton 2 navigation instument package with Triton dis- plays in the cockpit and regular inputs such as speed, depth, wind, GPS etc. Other features of the system are:

  • Broadband 36nm radar mounted on front of mast
  • B&G Zeus 9” Multifunction displays on each helm station
  • B&G Zeus 16” Chartplotter in navigation station
  • B&G Triton auto pilot
  • B&G V90 VHF with AIS
  • B&G forward facing sonar
  • Sailor FB150 Satelite phone/ Dome mounted on spreader 1
  • Fusion stereo with saloon and cockpit speakers

 

Safety Systems

Ocean passage safety gear including lift raft, jackets, EPIRB etc. Equipment list to be audited and in-ser- vice at time of survey

 

 

MAST & RIGGING

Mast

Carbon fibre mast and V-boom from Selden with Nitronic rod standing rigging. The mast has two aft swept spreaders, 15/16th rig configuration, electric TD400E headsail furler and all running rigging, halyards etc. Harken switch track is fitted to lower the mainsail car stack when the main is lowered for storage or reefing.

Rig

Boom is set up for a three-reef mainsail and single-line reefing system, and both mast and boom are finished gloss black.

 

 

Anchoring

 

The boat is fitted with a Lewmar V4 24V windlass with remote, 90m of 10mm chain and 33kg Rocna anchor. Secondary anchor also onboard

SAILS

Full inventory from North Sails

  • 3Di Endurance 3 Reef mainsail, full length battens and car sliders
  • 3Di Endurance Furling Headsail with UV protection
  • Norlon G2 Running Gennaker with snuffer sock and hoop
  • G Zero Gennaker NY250 including torsion rope
  • Storm sail – Furling Inner Jib NPL

OTHER

Various equipment including mooring lines, fenders, covers, tender etc. to be listed and presented in final inventory for sale

Price may be changed without notice Boat is offeredsubject to still being available

The particulars are believed to be correct but not guaranteed

The Spec

Manufacturer &
Model:
Nautor's Swan 54
Year: 2018
Length:
Price: €1,390,000 ex Vat
Share

Disclaimer:

The details of this vessel are in good faith but we cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.