54-004

Nautor's Swan 54

The Overview

The Swan 54 is a truly bluewater fast cruiser comfortableand seaworthy in rough conditions, with easy to handle sail plan and solid and reliable construction. Swan 54-004 has been built for a very experienced and demanding Swan Owner and is very highly specified for the easiest of short-handed sailing. She is one of the few recent model available on the market and offered at a very attractive asking price with VAT Paid.

CONSTRUCTION

General Scantlings, materials and workmanship throughout are consistent with the construction of a light hull, but without any sacrifice of strength or stiffness. Hull Laminate Foam cored sandwich glass fibre reinforced vinylester laminate for the topsides and a single skin glass fibre reinforced vinylester laminate under the waterline. Stiffening – All stiffeners are unidirectional glass layups. Stringers and web frames are pre-made hollow sections that allow them to be used for ventilation purposes or as cable conduits. Engine bed is of GRP with steel inserts. Special care is taken to assure rigid foundation and proper adhesion to hull. Structural bulkheads are marine plywood with GRP reinforcements. They are laminated to hull and deck. The stainless steel main shroud chain plates are bonded to the hull. Hull Finish Gelcoats are of weather-resistant NGA type. Hull colour to be standard white NGA 9650. Hull stripes to be standard dark blue NGA 7344. Bottom treatment with four layers of Gelshield epoxy primer and two layers of antifouling. Antifouling colour to be dark blue. Keel -The keel is a lead casting with antimony and carefully finished to accurate shape. Cast-in keel bolts are of high-tensile stainless steel. Steering System – Carbon fibre steering wheels with five single spokes, 1000 mm, instead of standard. The rudder is of foam filled GRP with tapered hi-tensile stainless steel stock, supported by two self-aligning bearings. Weed deflector in front of rudder. Sheaves provided with guards to prevent jamming of steering wire. Aluminium quadrant with end stops bolted to rudder stock. There are composite pedestals with roller bearings and brake

The Spec

Manufacturer &
Model:
Nautor's Swan 54
Year: 2016
Length: 16.48
Beam: 4.75
Draft: 2.44
Price: €1500000 VAT PAID
Hull Material: GRP
Location: Cala Galera, Italy
Call now to discuss: +44 (0)1489 854 850

Disclaimer:

The details of this vessel are in good faith but we cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.