Aria

Nautor's Swan 60

The Overview

The Swan 60 FD was conceived to meet a growing demand for a model engineered for performance, comfort and style. This performance orientated Swan boasts high stability, direct steering system, foils, carbon fibre spar package, and easy handling results in a light, responsive yacht. Aesthetic flair, contemporary interiors and leading technology make the Swan 60 graceful, capable and highly desirable, for both cruising and racing.

HULL

The hull is of single skin construction using glass/aramid hybrid fibre reinforced polyester laminate. A high proportion of the fibres are unidirectional, giving a stiff laminate with excellent strength and fatigue properties. Structural bulkheads are of marine plywood laminated to hull and deck with foam strips between. Stiff-ener flanges are unidirectional lay-ups over foam cores. Engine beds are of GRP.
Topside colour is white NGA gelcoat white
Boot top, cove stripe and coaming stripe gelcoat red (2003)
Hydraulic driver platform on transom
The keel is a lead casting with antimony and carefully finished to accurate shape. Cast-in keel bolts are of high-tensile stainless steel.
The mast is stepped through the deck onto a composite mast step.
Rudder is of foam filled GRP with tubular tapered stock of E-glass composite, supported by two self-aligning roller bearings.
Retractable bow thruster Max Power revised 2019
Dual steering gear, sheaves provided with guards to prevent jamming. Steering quadrant
bolted to rudderstock. Two 41” destroyer type stainless wheels with elkhide cover,
1.9 turns H.O. to H.O. Two pedestals with roller bearings.
Emergency tiller stowed in lazarette.

DECK

Deck is of sandwich construction, using glass/aramid hybrid fibre reinforced polyester laminate, with low-density closed cell foam core, and glued to the hull. High-density core under deck fittings. Laid teak 9 mm thick on deck, glued and vacuum bagged without screws.
Teak toerail bolted through hull/deck joint

Download the brochure or enquire for more information. 

The Spec

Manufacturer &
Model:
Nautor's Swan 60
Year: 2001
Length: 19.12m
Beam: 5.34m
Draft: 3.10m
Price: €900,000 Vat Paid
Hull Material: Fibreglass
Location: Rimini, Italy
Share

Disclaimer:

The details of this vessel are in good faith but we cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.